What an absolutely fantastic tube! The Tung-Sol 12AU7 Black Plates represents the very dawn of this valve’s history, with this specific unit being produced in 1948. It features the rare, early vertical D-getter and black plates, marking it as a true collector’s piece.
Here is another superb offering from Brimar, a tube that dates back to approximately 1959 and has survived and prospered until now. This specific tube is fairly different compared to many other Brimar productions, it actually reminds me more of the classic Mullard sound characterized by a warm midrange and a smoothly rolled-off top end. Despite these departures from the typical brand house sound, the tube is exceptionally good, it delivers the very complex and layered presentation that I have come to expect from Brimar, particularly from their long plate varieties.
After reviewing thousands of 12au7 tubes, encountering this particular model was a genuine revelation. The sound quality is exceptional, it is one of the very few tubes that successfully combines richness and warmth with absolute transparency. Every small detail is brought to the forefront, accompanied by a sound stage that is truly to die for. In terms of performance, it stands toe-to-toe with the legendary Mullard 12au7 long plates, yet it manages to offer an even creamier texture. Delicioso!
And here we go with Brimar again, I got lucky recently and received a lot of superb Brimar tubes. This tube is exceptionally nice, it is transparent, airy, and musical, making it well worth searching for. The biggest issue with these tubes is that there are so many fakes out there, as Brimar brand was unfortunately abused during the later days of tube manufacturing when the brand was stamped on tubes not manufactured by Brimar in the UK. I have encountered many tubes branded as Brimar that were actually made in Russia. One sure way to determine authenticity is to locate the date stamp, though that can be difficult since Brimar is one of the few European companies that did not use acid codes, meaning the stamps come off easily or could be removed by accident. To identify a genuine one, look for a tube with a distinctly flat top, as Brimar has some of the flattest tops in the industry with no creases like those found on Mullard or Amperex. Additionally, Brimar typically features either a square or round getter that is usually quite large.
There is no mistaking the sonic signature of the Mullard E88CC/6922 Wrinkled Glass; it carries that classic Mullard house sound that is impossible to confuse with anything else. However, despite its legendary status, it isn’t necessarily a personal favorite within the 6922 family. The primary drawback is the high-frequency extension, which rolls off a bit too early for my taste, resulting in a presentation that feels overly warm and a soundstage that lacks the width found in rival tubes.
This is truly one of the rarest 12au7 tubes I have ever encountered, it is usually branded by Amperex but was actually produced by Valvo in Hamburg, Germany, even though most cases are confusingly marked as Made in Holland. My specific unit dates back to 1956, and it remains a mystery why the labeling was handled this way during the mid 1950s. Sound-wise, this is a very unusual tube that offers a remarkably rich profile, far surpassing the Mullard square-getter from the same era. It provides a very warm and inviting sound while maintaining excellent transparency and sound stage, which is a fantastic and practically impossible combination to find. This is a very smooth sounding tube characterized by a luscious mid-range.
And another fantastic tube from Brimar. Sound wise, it’s very close to 6SN7 from Brimar. Very detailed, layered and textured, making this tube one of the best sounding 6SL7 tubes – so far I was unable to find equal quality tube in US line up. Absolutely beautiful. HIGHLY RECOMMENDED
The Cossor 12at7/ECC81 D-getter Solid plates is another fantastic offering from Mullard, this time carrying the Cossor brand. Generally, I avoid reviewing rebranded valves since they are typically identical to their more famous counterparts, but this 1955 gem was simply too good not to share. Produced at the legendary Blackburn factory, this version features a D-getter and solid plates, which are often preferred over the later three-hole plate designs.
The Marconi B309/12AT7 is a fantastic sounding tube that is, unfortunately, almost impossible to find today. This particular specimen was produced at Mullard’s Mitcham factory in 1958 and features the standard Mullard plates with three holes. It appears that this specific plate configuration was trialed on military-grade tubes before eventually being introduced to civilian production lines.