Top-rated 6AS7s

  1. Mullard 6080 Mitcham4.2 · 22 votes
  2. Raytheon JAN 60804.2 · 10 votes
  3. Cetron 72364.1 · 13 votes
  4. Bottlehead Crack Headphone Amplifier4.1 · 14 votes
  5. Tung-Sol 5998 Top Getter4.0 · 41 votes

Ranked by reader star ratings (3+ votes).

Thomson-CFS 6080WA France

Thgomson 6080WA

(63 votes, average: 3.78 out of 5)

True to the character of a lot of French tubes, these tubes is very well balanced across the audio spectrum. Bass is tight and strong, but not as deep as Mullard 6080. The top is transparent and airy and outperforms Mullard in this. Not as dynamic as Bendix 6080, but at the same time it is more liquid. Outside of Mullard and Bendix, this tube outperforms all other 6080 tubes in its quest to achieve life-like performance.

Share this post:

Tubes with Black and Gray Plates

Tubes with Black vs Gray plates

The debate regarding black versus gray plate vacuum tubes is a recurring topic in the audiophile community. While some skeptics argue that the preference for black plates is a marketing myth designed to justify higher price points, many enthusiasts maintain that they offer superior performance in high-fidelity systems. To understand the merits of each, one must look at the underlying physics of tube operation.

Continue reading →
Share this post:

Genalex 6AS7G/A8134 Cup Getter England

Genalex 6AS7G Cup getter England

(12 votes, average: 3.75 out of 5)

The Genalex 6AS7G/A8134 is frequently hailed as the absolute “gold standard” for this tube type, and while its reputation is well-earned, it comes with a specific sonic trade-off. In testing, the sound signature leans heavily toward the Mullard 6080, yet it carves out its own identity by offering a more spacious soundstage with enhanced air and finer micro-detailing.

Continue reading →
Share this post:

Mullard 6080 Mitcham

Mullard 6080 Mitcham

(22 votes, average: 4.23 out of 5)

For quite some time, the Tung-Sol 5998 was my mainstay—a truly excellent performer known for its relaxed, airy, and transparent presentation with impressive bass extension. However, everything changed when I secured a few sets of genuine Mullard 6080 tubes. These units are the real deal, featuring the iconic black spiky plates and the “R” factory code, confirming their origin from Great Britain.

Continue reading →

Share this post:

Tung-Sol 2399/5998 Top Getter

Tung-Sol 2399 top getter

(22 votes, average: 3.95 out of 5)

And another contender among 6AS7/5998/6080 tubes. This time it’s 2399, produced by Tung-Sol, but practically always branded by Chatham, the sound… well, the sound is exactly like 5998, which is to say FANTASTIC! The major constructional difference was the grid rods. I haven’t ever seen 5998 or even 421A with copper rods, but this beauty had them shining through the plates. For the rest, read Tung-Sol 5998 HIGHLY RECOMMENDED

Share this post:

Rolling with 6AS7 Tubes

Rolling with 6AS7 Tubes

After spending the last few weeks diving deep into the 6AS7 tube family, I’ve finally emerged with a definitive breakdown. While “tube rolling” power tubes comes with the occupational hazard of being hot as hell to the touch—making preamp rolling feel like a breeze by comparison—the sonic rewards are well worth the singed fingertips. Since this family offers a manageable selection compared to the endless sea of 12AX7s, I’ve put together this quick-reference guide to help you find your perfect match.

Continue reading →
Share this post:

Bendix JAN 6080

Bendix JAN 6080

(15 votes, average: 3.53 out of 5)

The Bendix JAN 6080 is a truly impressive find, especially when acquired at a bargain price and testing at NOS (New Old Stock) levels. This tube stands out as a high-performance alternative to more common power tubes, offering a level of refinement that is difficult to match in its family.

Continue reading →
Share this post:

Bottlehead Crack Headphone Amplifier

Bottlehead Crack Headphone Amplifier

(14 votes, average: 4.07 out of 5)


I had my eyes on Crack for quite some time. I’m going though phases of getting different After exploring various amplification designs—from Push-Pull and SET to Hybrids—I finally turned my attention to the world of OTL (Output Transformer Less) amplifiers. Based on my research, the Bottlehead Crack is widely considered one of the premier representatives of this category, especially at its $279 price point.

Continue reading →
Share this post:

Tung-Sol 7236

Tung-sol 7236

(29 votes, average: 4.00 out of 5)

This review is going to be very sort. If you want to know how Tung-Sol 7236 sounds just read our review for Cetron 7236. It’s that simple. Structurally they extremely similar although Tung-sol that I have is from 1962 and Cetron is from 1978. Getter is a bit different (tung-sol has more coverage with the getter), but that’s about it. Sound is identical. The history goes that Cetron purchased Tung-sol and kept producing the tubes. So if your amp uses 6as7, give these tubes (Cetron or Tung-sol) a try – they are superb! HIGHLY RECOMMENDED

Share this post:

Tung-Sol 5998 Top Getter

Tung-Sol 5998 Top Getter

(41 votes, average: 4.02 out of 5)

The Tung-Sol 5998 Top Getter is a truly great tube. It is exceptionally well-balanced, delivering a smooth performance without even a hint of sharpness or grain in its voice. When compared directly to other heavyweights like the RCA 6AS7, Svetlana 6N13P, and Raytheon 6080, the Tung-Sol stands out with its unique ability to remain dynamic yet warm (but never overly so).

Continue reading →
Share this post: