Mullard 12AX7/CV4004 Short Plates Russia

Mullard 12ax7/CV4004 Short Plates Russia

(68 votes, average: 3.56 out of 5)

New Sensor’s latest entry into the market, the Mullard CV4004/12AX7, presents a focused alternative to their standard Mullard reissue. While the previous iteration relied on a long-plate design, this new version utilizes a short-plate structure specifically engineered to combat the common headaches of high-gain amplification.

Continue reading →

Deciphering European Tube Date Codes

Most Philips-group tubes carry a small etched code that tells you which factory made the tube, when it was made and, often, what type it is. That group covers Philips, Mullard, Amperex, Valvo, La Radiotechnique, MBLE, Miniwatt and more, and Siemens used the same system on many of its tubes. The code is handy when the print has worn off, and it’s the only reliable way to know where a tube really came from: the same Heerlen-made ECC83 could leave the factory as a Philips, an Amperex, a Mullard or a Valvo.

A typical code has two lines, for example I61 / B1K3: an ECC83/12AX7 made by Mullard at Blackburn in the 3rd week of November 1961.

Continue reading →

Tubes with Black and Gray Plates

Tubes with Black vs Gray plates

The debate regarding black versus gray plate vacuum tubes is a recurring topic in the audiophile community. While some skeptics argue that the preference for black plates is a marketing myth designed to justify higher price points, many enthusiasts maintain that they offer superior performance in high-fidelity systems. To understand the merits of each, one must look at the underlying physics of tube operation.

Continue reading →

Boonton 102A/Type 45 Black Plates

Boonton 102A/Type 45 Black Plates

(4 votes, average: 4.75 out of 5)

The Boonton 102A is a fascinating piece of audio history that often flies under the radar of even seasoned collectors. While it shares a model number with the Western Electric 102A, it is vital to note they are completely different animals; this is not a telephone repeater tube, but a high-performance variant of the legendary type 45 power triode. Originally manufactured by RCA, these specific units were sent to Boonton Radio Corporation, where they underwent a rigorous selection process and were held to much stricter technical specifications for use in precision Q-meters. This pedigree makes them a “best of the best” subset of the standard production runs.

Continue reading →

Brimar 5Z4G Hole Plates O-Getter

Brimar 5Z4G Hole Plates O-getter

(18 votes, average: 4.00 out of 5)

The Brimar 5Z4G Hole Plates O-getter is a visually striking rectifier tube that brings more than just aesthetics to your setup. Functionally, it serves as a high-efficiency alternative to the standard 5Y3G. While a typical 5Y3 can result in a significant 60-volt drop, this “low drop” beauty only loses about 20 volts, giving your system more headroom and punch.

Continue reading →