Genalex KT88 England

Genalex KT88 England

(15 votes, average: 4.67 out of 5)

I have been attempting to secure a set of these tubes for quite some time, but their significant market cost remained a barrier. Eventually, I decided to take the plunge and invested in a matched quad for my McIntosh MC275 amplifier. Given that this represents hundreds of dollars of hard-earned money, the question of “regret” is subjective—worth is truly in the eye of the beholder. However, one thing is certain: I will absolutely never sell them.

Continue reading →

Tung-Sol KT170 to Be Introduced

Tung-Sol-KT170

Exciting news. Tung-Sol is releasing a new tube – Tung-Sol KT170. The tubes are capable of power dissipation of 85 watts (vs 70 watts for it’s predecessor KT150) and can do 300 watts in push-pull mode. This will be a huge tube (137x68mm/5.5×2.6inch)! The availability and exact tech specs are TBD.

And now the official announcement:

Tung-Sol KT170
Due to the success of the KT120 and KT150 tubes and the popularity of
these tubes with High-End Audio manufacturers, the Tung-Sol KT170
tube has been developed to provide a beam tetrode with even more
power capability. The Tung-Sol KT170 has a power dissipation of 85
watts allowing amplifiers using a pair of these tubes to reach power
output levels in excess of 300 watts.

Continue reading →

A Brief History of 12AX7 Tubes

Telefunken 12ax7 promotion

The 12AX7 is arguably the most iconic and widely utilized audio vacuum tube in history. Its enduring popularity stems from its ubiquitous presence in high-fidelity (Hi-Fi) home audio and, most notably, guitar amplifiers. In the latter, these tubes are often pushed to their operational limits, leading to a faster replacement cycle compared to other applications..

Continue reading →

National Union 6SL7 Black Glass

National Union 6SL7-ECC35 Black Glass

(24 votes, average: 3.79 out of 5)

This is a truly fascinating component and has quickly become one of my personal favorites. After auditioning hundreds of different tubes, it is incredibly rewarding to encounter something this special. From an aesthetic standpoint, the black glass is a classic choice, giving the tube a very sophisticated and “serious” appearance on the chassis.

Continue reading →

Edison Mazda Light Bulb (c. 1910-1920) with Original Receipt

Edison Mazda light bulb

A Historical Departure: The Edison Mazda Light Bulb (c. 1910–1920)

While this featured item deviates from our typical vacuum tube focus, its historical significance to the evolution of electronics makes it a noteworthy discovery. During a recent acquisition of vintage tubes, I uncovered a remarkable artifact: an original Edison Light Bulb dating back to the early 20th century.

Continue reading →

Russian & Soviet Tube Equivalents

Russian & Soviet Tube Equivalents

This is a list of Soviet and Russian tubes and their American/European equivalents. Not every equivalent is a drop-in replacement, so check the Notes column before swapping. Direct replacement means same pinout and ratings close enough for most circuits. Close equivalent means same pinout with minor rating differences. Not a drop-in means the base or pinout differs. Approximate means similar in purpose, so compare data sheets first.

Continue reading →