Burmester 909 Clone Amplifier (ASYPDZSW BL-9)

Burmester 909 Clone Amplifier (ASYPDZSW BL-9)

(9 votes, average: 4.56 out of 5)

There is a particular sound a screw makes when it is loose inside a very heavy amplifier and a UPS driver is carrying that amplifier up your driveway. A small, dry, gravelly rattle — if you’ve ever unpacked audio gear, it is the worst noise in the hobby. I heard it seven times, rolling around inside the ASYPDZSW BL-9 like dice in a cup, before I’d even cut the tape.

Continue reading →
Share this post:

Pass A3 Amplifier Clone

Pass A3 Amplifier Clone

(1 votes, average: 4.00 out of 5)

Fifty-two dollars, thirty watts, and a room that smells faintly of warm metal

I have a rule about amplifiers that arrive in padded envelopes: lower your expectations, then lower them again, and only then open the bag. So when the “PASS A3 Single-ended Class A Power Amplifier Kit / Amplifier Board 30W+30W” landed on my bench for fifty-two dollars — eBay cheerfully offering to let me pay in four Klarna installments of $11.25, which remains the funniest thing about this entire project — I assumed I was buying a souvenir. Two bare green rectangles from Foshan. A “reference to famous PASS A3 circuit,” as the listing puts it, with the immortal reassurance: “if Welding is correct, connect power Will can works.”

Continue reading →
Share this post:

Burmester 909 Clone Amplifier (Transaudio T9.4)

Burmester 909 Clone Amplifier (Transaudio T9.4)

(6 votes, average: 4.83 out of 5)

Let’s get the uncomfortable part out of the way immediately, because if I don’t say it, three of you will say it for me in the comments: the Transaudio T9.4 is a copy. It is a Chinese-built interpretation of the Burmester 909, an amplifier that in its current MK5 form costs roughly as much as a decent used Porsche, and the T9.4 costs roughly as much as the Porsche’s floor mats. I have no illusions about what this is. Neither should you. And yet here it sits in my rack, warm and smug, having spent the past two months quietly refusing to embarrass itself.

Continue reading →
Share this post:

FM Acoustics FM300A Clone

FM Acoustics FM300A Clone

(7 votes, average: 3.71 out of 5)

There is a particular kind of audio purchase that appeals to the tinkerer in me: the clone. The FM Acoustics FM300A is a legend from the eighties, an amplifier that in original form costs more than most cars, and the Chinese replica market has decided that the rest of us should get a taste. Depending on the seller and the level of cosmetic excess you choose, these land somewhere between $450 and $900, with most of the decent standard versions sitting around the $500 mark. That is a remarkable price for a 25 lb chassis full of real transformer, real heatsink, and real discrete circuitry.

Continue reading →
Share this post:

SMSL PA200 Power Amplifier

SMSL PA200 Power Amplifier

(11 votes, average: 3.18 out of 5)

I keep doing this to myself. Every couple of years a new class D amp shows up with a new buzzword attached to it, and every couple of years I convince myself that this is the one that finally cracks it. This time the buzzword was GaN, the amp was the SMSL PA200, and once again I’m writing up the results of what is turning into a very expensive education. Some people learn from the first three class D amps that didn’t click with them. I am apparently not one of those people.

Continue reading →
Share this post:

VTV Hypex NC502MP NCore Amplifier

VTV Hypex NC502MP NCore Amplifier

(9 votes, average: 4.00 out of 5)

I came to this one from the tube side of the fence, which I think matters for how the rest of this reads. I’ve spent years listening through many tube amps, and I wanted to know whether the modern Class D everyone keeps calling “measurably perfect” would actually make me want to sit down and listen. So I lived with a NC502MP-based amp for a while, and this is what I found.

Continue reading →
Share this post:

Ampapa D1 Class D Amplifier

Ampapa D1 Class D Amplifier

(12 votes, average: 2.83 out of 5)

Another day, another Class D amplifier. Selling for $179.99, modern desktop units like the Ampapa D1 promise to revolutionize budget HiFi on paper—offering vanishingly low distortion, high efficiency, and pristine measurements for under $200. Yet, all too often, perfect specs translate into an unbearable sound that leaves you reaching for the power button.

Continue reading →
Share this post:

 Dartzeel NHB-108 Amplifier Clone (Transaudio D5 Pro)

 Dartzeel NHB-108 Amplifier Clone (Transaudio D5 Pro)

(10 votes, average: 3.80 out of 5)

The Transaudio D5 Pro has generated a lot of chatter across Hi-Fi forums and video reviews as a surprisingly affordable power amplifier coming out of China. Positioned as a direct clone built upon the circuit topology of the famous darTZeel NHB-108 – a legendary Swiss ultra-high-end amplifier costing tens of thousands of dollars—the D5 Pro promises a taste of luxury sound at a tiny fraction of the original’s price tag.

Continue reading →
Share this post:

Burmaster 933 Amplifier Clone (BRZHIFI PA-933)

Burmaster 933 Amplifier Clone (BRZHIFI PA-933)

(11 votes, average: 2.91 out of 5)

As summer rolled around, my office began heating up quickly, making my standard HH Scott LK-150 tube amplifier feel more like a space heater than a piece of audio gear. Looking for a cooler-running solid-state alternative, I decided to seek out a reliable power amplifier for the season.

Continue reading →
Share this post:

Musical Fidelity A1S Clone Class A Amplifier (BRZHIFI)

Musical Fidelity A1S Clone Class A Amplifier (BRZHIFI)

(9 votes, average: 3.67 out of 5)

For years, I was curious about the audio clones coming out of China but hesitant to pull the trigger. However, their quality has significantly improved over the last decade. Intrigued by the idea of pure Class A power without breaking the bank, I decided to test the waters. I picked up this unit locally in the USA for $250, and I am happy to report that the amp didn’t disappoint.

Continue reading →
Share this post: