Favorite Tubes 12au7

Hi there, I’ve now listened and analyzed countless 12au7’s (and it’s equivalents) and thought I’d give my opinion on my current favorites.

1st Place Tie: Mazda 6189 Silver Plates 3-Mica and 50’s Valvo Long Plate Angled Getter

*these are somewhat similar to me in that they both have soaring/sparkling top-ends and beautiful midrange.  Both have lots of detail.  I think Mazda has better bass and is slightly more precise, forward and transparent.  But Mazda is also more dry.  Valvo is sexier and easier on the ears.  To me, the Valvos are a bit light on the bass.  Mazdas have maybe a larger soundstage, but Valvo is deeper and more intimate.  Tie for first.  If someone put a gun to my head, I’d choose the Valvos.

Continue reading

Fixing tubes – Clean & Polish

DeoxIt D5

Often when I buy or receive old tubes, pins on the tubes are oxidized. Big issue with oxidation is that it prevents pins making good contact with the socket. Because of that in the worst case, tube would appear to be completely dead or it will make strange noises during playback. Fixing this issue is quite simple. Just pray pins with DeoxIt D5, wipe in with a cloth and the problem will be solved in the majority of cases. If that don’t help, sometimes using a small screwdriver and cleaning pins one at a time to remove junk off the metal. They spray with Deoxit again to ensure that what ever is left is dissolved.

Continue reading

Deciphering European tube date codes

A lot of questions have been asked about when a tube is made, so here you go, a quick guide on how to decipher the date codes.

For the most European tubes made after 1955 date codes are located on the bottom of a side wall of a tube (not always the case)
Location of tube date code
In this case it’s B0D (this is for Mullard, Blackburn – 1960 – April)

Continue reading